Corrugated PVC Plastic Roof Tile Making Extruder / Roofing Tile Moulding Machine

Basic Information
Place of Origin: P.R.China
Brand Name: ACEMIEN
Certification: CE,ISO
Model Number: ACMT01
Minimum Order Quantity: 1 set
Price: USD60000-120000
Packaging Details: Wood case and film wrapped
Delivery Time: 50 days
Payment Terms: L/C, T/T
Supply Ability: 20 sets per month
Extrusion Capacity: 100-650kgs/hr NO. Of Extruder: 2 Extruders For 2 Layers, 3 Extruders For 3/4 Layers
Total Power: 245-350KW Voltage: 380V 50Hz 3P Or Customized
Total Machine Weight: 16-28MT Extruder Heating: 4/5 Zones, Aluminum Cast Heater
Temperature Control: PLC And Thermolcouple Extruder Features: Pressure&Temperature Warning
Sheet Width: 720mm,880mm,1040mm Or Customized Tile Thickness: 1.5-3mm
Surface Treatment: Roller Embossing Forming Mould: Aluminum Cast Minimum 22 Sets
Forming Machine Cooling: Fan Cooling Special Tunnel Sheet Cutter: Servo Motor And PLC Control
Max Linespeed: 4m/min Warranty: 1 Year
Packing: Wood Case And Dunnage Air Source: 0.3m3/min ,>0.6mpa
Mixer: SRL 300/600 500/1000 Central Height: 1m
Auxiliary Machine: Crusher And Miller


Tips on Plastic PVC Roof Tile

This is a new product in replacement of metal, ceramic and clay roof tile, it is also know as Spanish Artificial Plastic Roof Tile due to its cheap and durable features, which makes the house look nice and give a sense of ancient style, and its raw material PVC resin and filler material calcium carbonate are available almost everywhere around the world, and is also easy to get the rest of the auxiliary material.It's very popular in South America and Asia, and in some part of EU.


In some cold places, in order to make the tile longlasting, we need to add a little more ACR agent before material mixing which will not cause fragile when temperature is lower than freeze point. 


According to our oversea experiences, the thickness of plastic tile usually ranges from 1.6mm to 2.5mm in practise although we declare that the normal thickness is 1-3mm, glazed tile is usually thicker than corrugated tile with same no. of layers.

Corrugated PVC Plastic Roof Tile Making Extruder  / Roofing Tile Moulding Machine 0
 Corrugated PVC Plastic Roof Tile Making Extruder  / Roofing Tile Moulding Machine 1
PVC ASA Plastic Roof Tile Extrusion
Our plastic roofing tile production line adopts the most reliable co-extrusion and integrated control technology to produce colorful and long lifespan of plastic roof tile with surface pattern, and the main production procedures will go in 3 steps below:
1,Materials compounding
Completely mix all necessary chemical material such as PVC resin powder, calcium carbonate poweder and other additives  before extrusion processing.
To save cost for production, we use 2 or 3, sometimes even 4 extruders to carry out different roofing layer function through a  muti-layer distributor and T-die.

3,Downstream Processing
In this stage we used a series of machines like embossing machine, forming machine, cutting machine, and stackers to get a final roof tile with certain width, length and thickness. 


For more details, pls contact PVC Plastic Roof Tile Machine Manufacturer Acemien Machinery China

Corrugated PVC Plastic Roof Tile Making Extruder  / Roofing Tile Moulding Machine 2

 Corrugated PVC Plastic Roof Tile Making Extruder  / Roofing Tile Moulding Machine 3

3 Layer Plastic Roof Tile Detailed Machine List

No Machine Technical specifications

SJZ80/156 conical twin-screw extruder

(for middle recycled layer)

Extruder with double screw feed
Screw vacuum with double vacuum
Five-zone heating
Joint venture brand instrumentation
Bimetallic treatment screw

SJZ65/132 conical twin-screw extruder

(for bottom layer)

Extruder with double screw feed
Screw vacuum with double vacuum
Four-zone heating
Joint venture brand instrumentation
Bimetallic treatment screw

SJ50/30 single screw co-extruder

(for surface layer)

Bimetallic treatment screw
4 Extrusion mould Clothes hanger channel
Mirror polishing Cr plating
Three dimensional flow simulation software design
5 Embossing roller Hard chromium plating on surface
Design of spiral flow passage in roller
Motor separately drive to ensure consistent speed
6 Forming machine The module is a one-time die-casting molding
Module material LY12 high quality aluminum
Advanced machining center,one-time clamping of the module
Four cylinder lift more stable
7 Cutter Special positioning device to ensure the cutting accuracy
Downside the knife cutting mode running smoothly
PLC HMI operation,serve motor
8 Oven Double door double control, upside and downside at the same time operation
Flat open the door, the insulation effect is good and to prevent burns
Accurate temperature control is in 1 degree


PVC roof tile advantage
1,Nice appearance with bamboo shape.
2,Surface color last almost fresh by 25 year.
3,Anti-corrusion,will not rust like the iron or metal tile.
4,Heat resistant due to low conductivity of the roof sheet.
5,Used As durable weather sheet, and also for counterpart of wall panel sometimes.
6,Noise proof when it rains and winds.
7,Heavy load bearing even to heavy snow,rain and falling objects, strong enough to hold against Typhoon.
8,NOT leaking.
9,Easy to install and transport.
10,Environment friendly, can be recycled by plastic crusher and miller to be reused to extrude middle layer ,then to reduce manufacturing cost.
11,Anti Ultraviolet.

 Corrugated PVC Plastic Roof Tile Making Extruder  / Roofing Tile Moulding Machine 4

Plastic roof tile machine advantage from our factory
1,We have economic and special formulation for roof tile production as per you local market situation.
2,We have APP insert for safety and temperature warning and extruder pressure control.
3,Our production line of pvc roof tile is designed for nice appearance and running in steady status,we own several domestic patents.
4,We committed to provide technical support for production line during machine’s all life time.
5,As company best seller machine, we are improving the design and providing better machine for our customers all the time.
6,Our engineer are experienced enough for installation and debugging.
7, 15 Years’ Experience for R&D group.
After sales service and policy
1 Technical documents
All the symbols on the equipments should be in English. Seller is responsible to provide general layout plan, electric plan, installation direction, and manual book in English to Buyer on time.
2. Arrangement for inspection, installation and testing work
a. After all machines are delivered to customer's factory; Buyer is responsible for all preparation work, e.g. electricity supply, water supply, labors and cranes, etc.
b. ACEMIEN will prepare for visa application for their engineers, who are responsible for guide of machine installation and testing at the Buyer's factory.
c. The Buyer will buy the round-trip air ticket for Engineer if visa application is approved. The buyer is also responsible to bear expenses generated, e.g. visa formalities, meals, accommodation and allowance of USD80 per day for each engineer.
d. Engineer will give free training lessons to labors in buyer's factory.
e. If buyer doesn't request installation and commissioning by Seller's engineer in 4 months since date of bill of lading, which to be accounted all the machines has been successfully tested by buyer.
3. Quantity and quality guarantee
a. Quantity/Quality Discrepancy to destination port during transportation:
In case of quality/quantity discrepancy to destination port in transportation, customer should file claim within 30 days after the arrival of the goods at port of destination. Insurance company and shipping company will be responsible for any discrepancy of the goods caused by shipping company and other transportation organization and/or post office.
b. Guarantee period and after-sales services: 12 months since date of bill of lading
During this guarantee period, ACEMIEN will provide spare parts without any charge in case of quality discrepancy caused by us. If the malfunctions are caused by your incorrect operations, ACEMIEN will provide the buyer spare parts at cost price.
c. Long-term service:
ACEMIEN will charge the buyer cost price of spare parts beyond one year and provide long-term technical guide.
Corrugated PVC Plastic Roof Tile Making Extruder  / Roofing Tile Moulding Machine 5
Corrugated PVC Plastic Roof Tile Making Extruder  / Roofing Tile Moulding Machine 6

Contact Details
Cassie Jiang

Phone Number : +8613962218317