Embossed 2 Layer Pvc 4m/Min PLC Plastic Roof Tile Making Machine

 
What is an Composite Plastic PVC Roof Tile?
Recently, this composite plastic roof tile product becomes more and more popular all around the world, especially in Asia and South America,
due to its features of cheap and nice in use and long for lifespan.
 
The secret of the plastic roof tile features lie in the surface layer which is made of ASA or PMMA granule. The greatest benifit of ASA or PMMA is the ability to resist ultroviolet when placed on top of house, in this way the appearance of the plastic roof tile can keep fresh for more than 25 years.
The plastic roof tile products will not cause any problem for the environment, instead through a series of plastic sheet recycling machine which we also called plastic auxiliary machine such as plastic sheet crusher and miller, it can be recycled when damaged or wasted during the roof tile production, and it can be resued to feed the production line again as the middle layer to save the cost.
 
 
Brief Descriptioin of PVC ASA Plastic Roof Tile Extrusion Line
Acemien plastic roofing tile making machine integrated  the most reliable co-extrusion and control technology to produce colorful and long lifespan of plastic roof tile with cutomized surface printing pattern, the thickness of each layer is precisely allocated, and the tile forming mould block is smoothly polished and fixed well,  and the main production procedures goes in 3 steps below:
 
1,Materials compounding
Using our high efficient reliable vertical raw  material mixer, the raw materials such as PVC powder,Calcium Carbonate, and other additives likecloride PE, pre-wax, stearic acid, compound stabilizer, ACR, Paraffin are mixed together and homogenized, which is very important in sheet making, because the improper mixing would lead to product deficiency problem like crack, bubble and bump.
 
2,Co-extrusion 
In this stage, the completely mixed raw materials are transported, molten and fully plasticized, and then transferred to the sheet die mould due to extruder pressure caued by rotating screw, where the sheet thickness can be adjusted between 1mm to 3mm through screw of mould lips, finally the ASA coating layer is formed on the surface of roof tile.
 
3,Downstream Processing
In the final stage, the hot PVC ASA sheet is tracted to the tile forming machine with glazed mould after trimming, in which the wind generated by the cooling fan at both side will blown into a tunnel to cool down the temperature for the glazed mould after absorbing the heat from the running hot roof tile sheet, and then the formed glazed PVC tile sheet continues to be tractedto a cutting machine, where a certain length of the glazed roof sheet is cut as per PLC programmed, and finally the glazed roof sheet are piled on the stacker table which is ready to be packed.
 
For more details, pls conact PVC Plastic Roof Tile Machine Manufacturer Acemien Machinery China.

 
2 Layer Plastic Roof Tile Detailed Machine List

 
 
 
 
PVC roof tile advantage
1,Nice appearance with bamboo shape.
2,Surface color last almost fresh by 25 year.
3,Anti-corrusion,will not rust like the iron or metal tile.
4,Heat resistant due to low conductivity of the roof sheet.
5,Used As durable weather sheet, and also for counterpart of wall panel sometimes.
6,Noise proof when it rains and winds.
7,Heavy load bearing even to heavy snow,rain and falling objects, strong enough to hold against Typhoon.
8,NOT leaking.
9,Easy to install and transport.
10,Environment friendly, can be recycled by plastic crusher and miller to be reused to extrude middle layer ,then to reduce manufacturing cost.
11,Anti Ultraviolet.
 
 
Plastic roof tile machine advantage from our factory
1,We have economic and special formulation for roof tile production as per you local market situation.
2,We have APP insert for safety and temperature warning and extruder pressure control.
3,Our production line of pvc roof tile is designed for nice appearance and running in steady status,we own several domestic patents.
4,We committed to provide technical support for production line during machine’s all life time.
5,As company best seller machine, we are improving the design and providing better machine for our customers all the time.
6,Our engineer are experienced enough for installation and debugging.
7, 15 Years’ Experience for R&D group.
 
 
After sales service and policy
1 Technical documents
All the symbols on the equipments should be in English. Seller is responsible to provide general layout plan, electric plan, installation direction, and manual book in English to Buyer on time.
2. Arrangement for inspection, installation and testing work
a. After all machines are delivered to customer's factory; Buyer is responsible for all preparation work, e.g. electricity supply, water supply, labors and cranes, etc.
b. ACEMIEN will prepare for visa application for their engineers, who are responsible for guide of machine installation and testing at the Buyer's factory.
c. The Buyer will buy the round-trip air ticket for Engineer if visa application is approved. The buyer is also responsible to bear expenses generated, e.g. visa formalities, meals, accommodation and allowance of USD80 per day for each engineer.
d. Engineer will give free training lessons to labors in buyer's factory.
e. If buyer doesn't request installation and commissioning by Seller's engineer in 4 months since date of bill of lading, which to be accounted all the machines has been successfully tested by buyer.
3. Quantity and quality guarantee
a. Quantity/Quality Discrepancy to destination port during transportation:
In case of quality/quantity discrepancy to destination port in transportation, customer should file claim within 30 days after the arrival of the goods at port of destination. Insurance company and shipping company will be responsible for any discrepancy of the goods caused by shipping company and other transportation organization and/or post office.
b. Guarantee period and after-sales services: 12 months since date of bill of lading
During this guarantee period, ACEMIEN will provide spare parts without any charge in case of quality discrepancy caused by us. If the malfunctions are caused by your incorrect operations, ACEMIEN will provide the buyer spare parts at cost price.
c. Long-term service:
ACEMIEN will charge the buyer cost price of spare parts beyond one year and provide long-term technical guide.