|Plastic Processed:||PP Exrtrusion System||Inverter:||ABB Frequency Controller|
|Dimension(l*w*h):||25*3*3.5m||Application:||Building Concrete Forwork|
|Voltage:||Customized||Final Product:||Pp Formwork|
lightweight concrete formwork,
plastic formwork machine
Plastic Hollow Building Concrete Formwork Making Machine For Plypropylene Hollow Sheet
PP plastic construction template production machine operation engineer in the careful observation of the foaming and peeling of the template, fine line adjustment, adjustment of the construction template production line machinery equipment is generally do not need the operator to stay beside the machine for a long time, the main guarantee of the continuous supply of raw materials on the line.
The users and operators of PP wood-plastic building formwork machine and equipment are also familiar with the operation essentials of the production line of leather foamed building formwork by the equipment in our factory.The following is the normal production site of standard building formwork with width 915.
The drawing part of PP building template equipment is designed before the embossing roller, so that the surface of the produced plastic building template has lines and the production information of the enterprise as well as the company's trademark information.
PP plastic building template production equipment embossing roller using oil temperature or water temperature cooling control, traction roller using rubber roller 8 combination traction, force stability and other characteristics.
Traction edge-cutting device of PP plastic building formwork production line, continuous cutting of the edge material of skinning foamed board produced, and centralized recovery of dust after cutting.
PP plastic construction template production line mechanical equipment cutting edge part of the details, width can be adjustable, can be customized in the market demand of different sizes.
For the cutting part of PP building template equipment, PLC touch screen human-machine interface control system is used to precisely control the cutting part. For the cutting part of PVC plastic building template production line mechanical equipment, dust dust collector is also used to centrally recycle the dust.
Work condition (provide by customer)
Dimension (M*M*M): 30(Length)×3(Width) ×3(Height)
Crane: Machine positioning
|Temperature & Humidity||≤40℃, ≤80%|
|Power supply||3-phase, 380 V, 50 Hz(or customized)|
|Wire/cables:||Wires/cables from power supply to control cabinet of this production line;|
|Cooling Water hose/pipe||
Water supply to machines and pools
≤20℃, ≥0.5Mpa, ～5-6tons/hr
|Lubrication oil:||Sinopec, Exxon mobile|
|Single Production Line Equipment List|
|1||Screw loader||1set||120 Extruder|
|2||Vacuum loader||1set||75 Extruder|
|3||SJ120/33 single screw extruder||1set|
|4||SJ75/33 single screw extruder||1set|
|5||Screen Changer 1||1set||120 Extruder|
|6||Screen Changer 2||1set||75 Extruder|
|7||Metering Pump 1||1set||120 Extruder|
|8||1000mm Extrusion Mould||1set|
|9||Distributor for 3 layer||1set|
|10||Vacuum Calibration Table||1set||Three pairs of calibration modules|
|13||Haul-off Unit||1set||High Quality Rubber Roller|