|Screw Design:||Double-screw||Automatic Grade:||Automatic|
|Application:||Plastic Roof Tile Machine||Voltage:||Customized|
|Raw Material:||PVC||Warranty:||12 Months|
|Weight:||2500 Kg||After-sales Service Provided:||Field Installation|
roof sheet making machine,
roofing tile making machine
Good quality professional pvc roofing sheets tile making machine production line
The PVC+ASA Composite Glazed Roof Tile Forming Machine is development by ACEMIEN R&D team, which mainly used in the forming of plastic glazed tile. The module is a one-time die-casting molding ,and the material is LY12 high quality aluminum with high strength. Advanced machine center, Guaranteeing one-time clamping of the module. It is versatile and interchangeable. The transmission is balanced and reliable, and the whole machine drive formwork four cylinder lift. It is very convenient to open and close. The forming machine is driven by the motor, which can be moved forward and backward. The mold frame has air-cooling device inside, which can directly blow cold air to the back of the module to promise cooling effect. The misalignment distance of the upper and lower modules can be adjusted manually to adjust the fullness of the waveform of the product.
This structure fully sealed with screw head, so solve the problem of the corrosion of screw, the aging of waterproof apron, the leakage of screw hole;Two resistance: screw heads, waterproof apron keep from air and rain, so it's permanent and durable.One anti: this corrugated tile can against 10 grade typhoon.The structure and character of PVC Anti-corrosion complex corrugated sheet. With the special accessories, the plastic roof tile can enhance three grades of waterproof, wind and corrosion resistance.This line consists of single screw extruder, hanger-style flat die, size forming mould, high--efficiency, vacuum pump, hauling--off unit, pneumatic cutter and other auxiliary equipments.The corrugated sheet extrusion line consists of single screw extruder, corrugation forming machine.PVC glazed tile is a type of asbestos-free composited sheet, extruded based on PVC resin, co-extruded with ASA, PMMA engineering plastic.
There is water-proof apron below than can prevent the infiltration of surface water from screw hole. The increase of screw fixed position can against typhoon. Three prevent: the prevent of edge waves, dark through, screw holes.PVC glazed tile extrusion line consists of premixing units, conical extruder, co-extruder, T-die mold, calibration device, embossing rollers, saw cutter, hauling set, etc. Process is: premixing the PVC resin with fillers, additives, then extrude the mixed PVC materials together with ASA/PMMA co-extruding, to T-die molding; after calibration, embossing, cutting, to make the final PVC tile.
|SJ50/30 single screw extruder||Technical data|
38CrMoAl ,Nitriding, thickness: 0.4 ~ 0,7mm, Polishing
Rotating speed (counter rotating): 1-48RPM
38CrMoAl ,Nitriding, thickness: 0.4 ~ 0,7mm, Grinding.
Heating zones: 4
Heating mode: Cast Aluminum heater covered with stainless steel
Heating power: 8kw
Cooling mode: Blower 0.18kw×4sets
|Driving motor||Motor power: 15Kw AC (SIEMENS)|
Main electric cabinet
Air Switch: LS
Temperature controller: Omron
|Outer size and weight||