|NO. Of Extruder:||2/3/4||Extruder Model:||SJZ92/SJZ80/SJZ65/SJZ51/SJ50|
|Extruder Features:||APP Control And Current&pressure Warning||Extruder Heating:||Aluminum Cast Or Ceramic Bearing|
|Temperature Range:||50-300 Degrees||Extruder Feeding Mode:||Compulsory Mode|
|Machine Voltage:||380V 50Hz 3P Or Customized||Weight:||14-18MT|
|Total Power:||121-148KW||Sheet Width:||880mm,1040mm Or Customized|
|Sheet Thickness:||1-3mm Normally||Forming Mould:||Aluminum Cast|
|Forming Machine Cooling:||Fan Cooling 500W||Sheet Cutter:||Servo Motor And PLC Control|
|Warranty:||12 Months||Packing:||Wood Case And Film Wrapped|
|Cooling Water:||5-6MT/HR Circulation||Air Power:||0.3m3/min ,＞0.6mpa|
|Powder Mixer:||High Speed Hot And Cooling Mixing Group 200/500 300/600 500/1000|
148KW Glazed Pvc Roof Tile Machine,
PLC Pvc Roof Tile Machine,
PLC Pvc Roof Tile Machine
Plastic Glazed Roof Tile Production Engineering Drawing
PVC Plastic Roof Tile Production Line Introductioin
This roofing tile production line introduces the latest co-extrusion and control technology to produce durable high quality roof tile sheet with kinds of colors and surface pattern, and the main production procedures are devided into 3 parts below:
Due to our reliable high speed hot and cool group mixer, the raw materials such as PVC powder,calcium carbonate, cloride PE,pre-wax,stearic acid, compound stabilizer,ACR, Paraffin and ASA are completely mixed, which is also an key part in sheet quality control, because the improper mixing would lead to sheet deficiency problem like crack,unflat,and bump.
In this stage, the completely mixed raw materials are fully plasticized in a perfect status, and transferred to the sheet die mould by extruder pressure, in which the sheet thickness can be adjusted between 1mm to 3mm.
3,Forming and cutting.
In the final stage, the hot PVC ASA sheet is hauled off to a forming machine with glazed mould, in which the wind generated by fan to blown into a tunnel to cool down the temperature of glazed mould, and then the formed glazed sheet continues to be hauled off to a cutting machine, where a certaiin length of the glazed roof sheet is cut as per PLC controlled, finally the glazed roof sheet are piled on the stacker table which is ready to be packed.
Detailed Machine List
|1||SJZ80/156 conical twin-screw extruder||Extruder with double screw feed
Screw vacuum with double vacuum
Joint venture brand instrumentation
Bimetallic treatment screw
|2||SJ50/30 single screw co-extruder||Bimetallic treatment screw|
|3||Extrusion mould||Clothes hanger runner
Mirror polishing Cr plating
Three dimensional flow simulation software design
|4||Embossing roller||Hard chromium plating on surface
Design of spiral flow passage in roller
Motor separately drive to ensure consistent speed
|5||Forming machine||The module is a one-time die-casting molding
Module material LY12 high quality aluminum
Advanced machining center,one-time clamping of the module
Four cylinder lift more stable
|6||Cutter||Special positioning device to ensure the cutting accuracy
Downside the knife cutting mode running smoothly
PLC HMI operation
|7||Oven||Double door double control, upside and downside at the same time operation
Flat open the door, the insulation effect is good and to prevent burns
Accurate temperature control is in 1 degree
PVC roof tile advantage
1,Surfance color keep almost fresh by 25 year.
2,Nice appearance wiith bamboo shape,make it an acient and elegant roofing.
3,Anti-corrusion,rusty never take place on plastic roofing.
4,Heat resistant due to low conductivity of the PVC material especially the surface layer made of ASA engineering plastic.
5,Used as durable weather sheet, and also for counterpart of wall panel sometimes.
6,Less noise when it rains and winds.
7,Heavy load capacity even to heavy snow,rain and falling objects, strong enough to hold against Typhoon.
9,Easy to install and transport due to light weight.
10,Environment freindly, it can be recycled by plastic crusher to feed as waste raw material ,so in this way it also reduce manufacturing cost as the recycled PVC powder can replace the new PVC powder under certain circumstances.
Plastic roof tile machine advantage from our factory
1,We have economic and special formulation for roof tile production.
2,We have app insert for safety warning and extruder control.
3,Our production line of pvc roof tile is designed for nice appearance and running in steady status,we own several domestic patents.
4,We committe to provide technical support for production line all life time.
5,We sell 95 sets of this production line each year as our best seller machine.
6,Our engineer are experienced enough for installation and debugging.
7,We Acemien Machinery China is famous for plastic extruding machine and meltblown machine.
After sales service and technical support
1 Technical documents
All the symbols on the equipments should be in English. Seller is responsible to provide general layout plan, electric plan, installation direction, and manual book in English to Buyer on time.
2. Arrangement for inspection, installation and testing work
a. After all machines are delivered to customer's factory; Buyer is responsible for all preparation work, e.g. electricity supply, water supply, labors and cranes, etc.
b. ACEMIEN will prepare for visa application for their engineers, who are responsible for guide of machine installation and testing at the Buyer's factory.
c. The Buyer will buy the round-trip air ticket for Engineer if visa application is approved. The buyer is also responsible to bear expenses generated, e.g. visa formalities, meals, accommodation and allowance of USD80 per day for each engineer.
d. Engineer will give free training lessons to labors in buyer's factory.
e. If buyer doesn't request installation and commissioning by Seller's engineer in 4 months since date of bill of lading, which to be accounted all the machines has been successfully tested by buyer.
3. Quantity and quality guarantee
a. Quantity/Quality Discrepancy to destination port during transportation:
In case of quality/quantity discrepancy to destination port in transportation, customer should file claim within 30 days after the arrival of the goods at port of destination. Insurance company and shipping company will be responsible for any discrepancy of the goods caused by shipping company and other transportation organization and/or post office.
b. Guarantee period and after-sales services: 12 months since date of bill of lading
During this guarantee period, ACEMIEN will provide spare parts without any charge in case of quality discrepancy caused by us. If the malfunctions are caused by your incorrect operations, ACEMIEN will provide the buyer spare parts at cost price.
c. Long-term service:
ACEMIEN will charge the buyer cost price of spare parts beyond one year and provide long-term technical guide.